Foam briquette machine shipped to Chinese client

Pubdate: 2020-10-27

Our Chinese old client bought our copper wire recycling machine, and this year, he developed his business with foam recycling. And he came to buy our foam briquetting machine to save his transportation cost so that he can earn more.

He bought our SY-C-400 model. It can complete 200-300kg/hour foam per hour.

The foam briquette machine adopts physical compression, no heating, no pollution, little noise,little power, and can be transported to any place freely. 

The principle of the foam briquette machine is to compress the foam into blocks using a screw compression mechanism. When in use, the operator only needs to put the foam block into the hopper. There is a shredding mechanism inside the machine to break the foam block, and then the spiral mechanism squeezes the small block of foam into a square compression block. 

This briquetting machine can use several common forms such as cold pressing, hot pressing, hot melting and hydraulic pressure. There is a pressure adjustment device at the front of the compression section to adjust the compression ratio. According to the characteristics of the raw materials, the compression ratio can reach 30 to 40 times, in order to achieve the purpose of reducing the volume of the foam, and facilitate the long-distance transportation and recycling granulation.

If you need this Foam briquette machine,foam compressor, welcome to talk to us at any time.